Fig.2
2. Select installation location
You may install the doorbell on the front door. The sensor uses simple
adhesive to stick to a surface. Please install the sensor on a relatively
flat and smooth surface
Peel off the adhesive backing, then stick the doorbell to the surface. See
figures below.
Fig.3
Specifications
Model：DR0001
Range (open area): 300ft
Radio Frequency: 915MHZ
Voltage: DC 3.0V
Amperage: Idle ≤ 600nA; Working ≤ 25mA
Working Temperature: 14 °F ~ 122 °F
To Next Page
Loading...
