boso medicus smart - Page 53

53
After an interval of two minutes a
repeat measurement can take
place.Only the cuff needs to be in-
flated again.
➡ If no further measurement is required,
remove the cuff from the arm.
Measuring your blood pressure
2
min
Blood pressure is a dynamic parameter and
can be affected by the patient’s position,
e.g. sitting, standing, lying, moving, before
or during the measurement, physical con-
dition (stress, disease, etc.).
➡ If the measurement result is obviously
wrong, repeat the measurement.
The unit switches itself off automatically
after about 1 min. To repeat a measure-
ment, press the start button again.
GB
medicus_smart_1609sd.qxd 03.11.2016 7:40 Uhr Seite 53