Need help?Do you have a question about the Boss Audio Systems AR3000D and is the answer not in the manual?
General| Amplifier Class | D |
|---|---|
| Channels | 1 |
| Crossover Type | Low-Pass |
| Bass Boost Frequency | 45 Hz |
| Speaker Level Inputs | Yes |
| RMS Power @ 2 Ohms | 1500 Watts |
| Max Power @ 2 Ohms | 3000 Watts |
| Low-Pass Crossover Frequency | 40 Hz - 180 Hz |
| Input Sensitivity | 0.2V - 4V |
| RMS Power @ 4 Ohms | 1000 Watts |
General safety advice regarding potential hazards like electric shock or smoke.
Guidance on checking car layout before drilling or cutting holes.
Instructions for locating the amplifier's mounting position.
Warning against operating below 1 Ohm load to prevent damage.
Information on fuse ratings for the AR3000D and AR4000D models.
Explains the purpose of the input level control as a signal matcher, not volume.
Advice on using appropriate wire gauge and grounding for safe connections.
Specifies the minimum 2-ohm impedance for bridged amplifier configurations.
Diagrams illustrating power connection without a stiffening capacitor.
Diagrams illustrating power connection with a stiffening capacitor.
Steps to diagnose amplifier power-up issues.
Troubleshooting when the protection LED is illuminated.
Steps to resolve issues with no sound from the amplifier.
Guidance for insufficient audio signal level.
Resolving audio issues present in only one channel.
Diagnosing and fixing high-frequency noise in speakers.
Troubleshooting and eliminating squealing sounds from speakers.
Steps to correct audio distortion.
Addressing issues where the amplifier becomes excessively hot.
Identifying and resolving static-type engine noise interference.
Diagnosing and fixing alternator whine interference.
To Next Page