Do you have a question about the Boss Audio Systems CHAOS AMPLIFIERS CH450 and is the answer not in the manual?
Use specified parts, replace all chips, and handle tantalum capacitors carefully.
Ensure correct part/wiring placement and proper automotive wiring connections.
Verify post-repair safety and follow guidelines for soldering flexible PCBs.
Keep unit OFF during work; recheck all connections before applying power.
| Channels | 4 |
|---|---|
| THD @ RMS Output | 0.01% |
| Minimum Speaker Impedance | 2 ohms |
| Max Power | 450 Watts |
| Signal to Noise Ratio | 90 dB |
| Bass Boost | 0-12dB |
| Low Pass Filter | 50Hz-250Hz |
| Impedance | 4 Ohms |












Loading...