User’s Manual BCAM50
PLEASE READ BEFORE INSTALLATION
1. This product should be installed in a location that will NOT interfere with any or a
combination of: Driver’s eyesight, Airbags or any other safety restraint system.
2. Keep the product away from strong magnetic fields, which may cause damage to this
product.
3. The MicroSD ™ card is already formatted and ready for use.
4. The SD Card in this product is not intended to store any other files. Promptly back
up important videos and images.
5. When formatting/and or use of the SD card, do not disconnect the power supply, or
insert/remove the SD Card. This will result in data being corrupt and or erased.
6. To prevent electric shock, do not use the device in an area where high moisture or
humidity is present.
7. Do not use the BCAM50 in temperatures above 140⁰F or below 0⁰F.
8. If the vehicle interior is expected to be hot, remove the camera from the mount and
place in a cool area until it’s going to be used again.
9. Only use the dedicated charger and related accessories compatible with this product.
10. Dispose of properly, do NOT dispose in landfill.
To Next Page
Need help?
General