EasyManua.ls Logo

Boss Audio Systems Electronic Crossover User Manual

Boss Audio Systems Electronic Crossover
3 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Question and Answer IconNeed help?

Do you have a question about the Boss Audio Systems Electronic Crossover and is the answer not in the manual?

Boss Audio Systems Electronic Crossover Specifications

General IconGeneral
Channels2
Crossover Slope12dB/Octave
Low Pass FilterYes
High Pass FilterYes
Frequency Response10 Hz - 45 kHz

Summary

Troubleshooting Common Issues

Signal Processor Not Turning On

Check remote turn-on wire, +12V wire, and ground connection for proper functionality.

Low Sound Level

Verify wiring, connections, and RCA cables are not loose, disconnected, or faulty.

Important Precautions for System Use

Safe Listening Volume

Never drive with volume so high that you cannot hear surrounding traffic.

Hearing Protection

Be aware that prolonged exposure to excessive volume can cause permanent hearing damage.

Environmental Protection

Keep all electronics away from moisture, dust, extreme heat, and vibrations.

Installation and Wiring Guide

Mounting and Power Connection

Instructions for finding a location, mounting the unit, and connecting power, ground, and remote wires.

Controls and Operation Explained

Related product manuals