Need help?Do you have a question about the Boss Audio Systems HP32 and is the answer not in the manual?
General| Driver Size | 40mm |
|---|---|
| Frequency Response | 20Hz - 20kHz |
| Impedance | 32 Ohms |
| Connectivity | Wired |
| Foldable | Yes |
| Color | Black |
| Connector | 3.5mm |
| Cable Length | 1.2m |
Read the manual carefully before installation for safe and enjoyable usage. Ensure proper installation and keep the manual for future reference.
Do not operate while driving. Refer repairs to qualified technicians. Report any smoke, odor, or damage to a service center immediately.
Avoid moisture, direct sunlight, and extreme conditions. Use provided parts and a 12V DC power source. Test connections before final installation.
The HP32 wireless infrared audio system includes wireless headphones, intended for use with specific BOSS AUDIO systems.
Addresses common issues like no audio or poor sound quality, suggesting checks for power, cables, batteries, and IR sensor proximity.
Details technical specifications for the HP32 headphones, including transmission system, carrier frequencies, distortion, S/N ratio, and power source.
Instructions for replacing the two AAA batteries in the earphone housings, emphasizing correct polarity and battery conservation.
Guidance on optimal placement and range for receiving signals from a BOSS AUDIO monitor's infrared transmitter for best sound quality.
To Next Page