To Next PageTo Next Page
Need help?Do you have a question about the Boss Audio Systems HS-IR and is the answer not in the manual?
Transmission System| carrier frequency | 2.3 MHz (left channel), 2.8 MHz (right channel) |
|---|---|
| modulation | FM |
| mode | Stereo |
Audio Performance| S/N ratio | greater than 60 dB |
|---|---|
| channel separation | greater than 40 dB |
| distortion | less than 1% |
Frequency Response| frequency response | 30Hz - 20kHz |
|---|
Power| power source, headphones | (2) x AAA batteries |
|---|---|
| current consumption, headphones | 25 mA max (during play) / 15mA (muted) |
| infrared light | IR |
Guidelines for safe operation, including avoiding driving hazards and self-repair.
Advice on avoiding unsuitable installation locations like wet or hot areas for proper functioning.
Lists the components of the HS-IR wireless infrared audio system and the HP10 headphones.
Locates the infrared sensors on the headphone earcups.
Explains the function of the volume control knob on the headphones.
Details the power switch operation and automatic shut-off feature.
Describes the function of the power indicator light on the headphone.
Indicates the location of the battery compartment for headphone power.
Identifies the IR emitters responsible for transmitting the audio signal.
Points out the holes used for mounting the transmitter unit.
