MRC5/ MRC5B
Installation Instructions
Marine Radio Cover
- 1 -
Thank you for purchasing a BOSS Audio Systems product. Please read through
these instructions carefully so you will know how to install this product properly.
Package Contents
• 1x Marine radio cover
• 6x Pan head screws (M4 x 25mm)
and clip nuts
• Sticky EVA gasket ring
• Warranty
Introduction and Features
• Head unit installation opening (W x H): 7.18” x 2.11” (182.4 x 53.5 mm)
• Fits single DIN head units (W x H): 7” x 2.0” (178 x 51 mm)
• Marine radio cover dimensions (W x H x D): 9.09” x 4.02” x 1.92” (231 x 102 x 48.8 mm)
• UV-stabilized ABS plastic housing
• Impact-resistant ABS
• Door sealed with an EVA gasket for water resistance
Product Overview
Flip-up door
Screw hole for xing
the radio cover
Removable plastic tab
Head unit installation opening
To Next Page
Need help?
General