Boss 610UA User Manual

Cell leakage may cause damage to the remote control. Do not throw cells into fire, as this may cause an explosion.

Reduce risk of fire, electric shock, and interference. Refer to qualified person for repairs.

First complete the electrical connections and then check for correctness.

Unit dimensions and dashboard opening requirements for installation.

Details the wiring diagram and connections for the unit, including cautions.

Steps to remove the main unit from its mounting sleeve using bracket keys.

Turn the unit on/off and switch between modes like RADIO, USB, CARD, AUX.

Memorize and recall radio stations (1-6) for different bands.

Display and adjust the real time (hour and minute).

Information regarding the functionality and use of USB and Micro SD card slots.

Adjust volume and cycle through sound settings like Bass, Treble, Balance, Fader.

Navigate tracks, manual/auto tuning, and fast forward/backward functionality.

Select radio bands, auto-scan stations, or search tracks in USB/SD mode.

Temporarily turn off audio output without turning off the unit.

Description of the auxiliary input jack for audio devices.

Reset all parameters to factory default values using a sharp point.

Troubleshooting for no power or no sound, checking engine, cables, and fuses.

Addresses static in broadcast and preset station resets, checking signal and battery.

Troubleshooting USB/SD card connection issues and no sound.

Details power supply, output, impedance, dimensions, weight, and fuse.

Frequency range and channel step for FM broadcast.

Frequency range and channel step for AM broadcast.

Usable audio formats, pre-amp output, frequency response, and S/N ratio.