Need help?Do you have a question about the Boss BF-1 Flanger and is the answer not in the manual?
General| Type | Flanger |
|---|---|
| Input Impedance | 1 MΩ |
| Output Impedance | 1 kΩ |
| Current Draw | 15 mA |
| Connectors | Input, Output, AC Adapter |
| Controls | Manual, Depth, Resonance |
| Power Supply | 9V DC |
| Weight | 400 g / 14 oz (including battery) |
Adjusts the delay time of the sound, varying between 0.5mS and 16mS.
Manages the sweep range of the delay time, affecting the width of the flanging effect.
Determines the speed of the sweep, controlling how fast the flanging effect cycles.
Enhances the unique sound characteristics of the flanger effect.
Connects instruments, amplifiers, and the AC power adapter.
Guides for connecting guitars, keyboards, multi-performance setups, and tape dubbing.
Connect all cords, set initial knob positions, and plug in the AC adapter.
Set knobs to desired positions to achieve preferred sound settings.
Use the switch to toggle between effect and normal sound modes.
Example control settings for achieving a phase sound effect.
Example control settings for achieving a chorus sound effect.
Example control settings for achieving a vibrato sound effect.
Example control settings for achieving a strong flanging sound.
Example control settings for achieving a funky sound effect.
To Next Page
