To Next PageTo Next Page
Need help?Do you have a question about the Boss BR-864 and is the answer not in the manual?
General| Type | Digital Recorder |
|---|---|
| Number of Tracks | 8 |
| Simultaneous Recording Tracks | 2 |
| Simultaneous Playback Tracks | 8 |
| Recording Media | SmartMedia Card |
| A/D Conversion | 24-bit |
| D/A Conversion | 24-bit |
| Sampling Rate | 44.1 kHz |
| Bit Depth | 24-bit |
| Frequency Response | 20 Hz - 20 kHz |
| Phantom Power | Yes |
| Outputs | RCA |
| EQ | 3-band EQ |
| USB | Yes |
| Power supply | AC Adapter or Batteries |
| Storage Capacity | Up to 128MB (varies by card) |
| Effects | Yes (Various Guitar, Bass, Vocal, and Mastering Effects) |
Provides essential safety guidelines for operating the unit and its accessories.
Details on using the AC adapter and battery power, including potential issues and recommendations.
Details the necessity and procedure for initializing memory cards before use.
Illustrates how to connect external devices like microphones, guitars, and audio sets.
Provides the correct sequence for powering on the unit and connected devices.
Step-by-step guide to select and play the pre-loaded demo songs.
How to play back songs using TRACK faders and MASTER fader.
Steps for safely powering down the unit and connected equipment.
Instructions for inserting the memory card and formatting it for use.
Details on choosing a data type (HiFi, STD, LONG) for new song recordings.
Guide on choosing input jacks (Guitar/Bass, Mic, Line) for connecting instruments.
Introduction to insert effects and how to switch effect patches.
Introduction to the Rhythm Guide, its modes (Pattern/Arrangement), and basic operation.
Steps for selecting recording tracks and understanding track status indicators.
Detailed steps to initiate and perform basic recording using REC MODE and PLAY.
Instructions for playing back recorded tracks and adjusting track volumes.
Explains recording additional performances while listening to existing tracks.
Procedure for mixing multiple tracks onto a single V-Track.
Using the Mastering Tool Kit to optimize levels for the final master.
Steps for safely powering down the unit and connected equipment.
Procedure for safely removing the memory card after powering off.
Guide on choosing tracks for recording and understanding track status indicators.
Steps to initiate recording using REC MODE, REC, and PLAY buttons.
Guide on using manual punch-in/out to re-record specific portions of a track.
Using auto punch-in/out for accurate re-recording at predetermined points.
Steps to set up and perform recording using the auto punch-in/out function.
Explanation and usage of Undo and Redo functions to reverse or reapply operations.
Step-by-step guide to selecting, editing, and adjusting parameters for insert effects.
Procedure for naming and saving edited effect settings as user or song patches.
Guide to selecting, editing, and adjusting parameters for Mastering Tool Kit patches.
Procedure for naming and saving edited Mastering Tool Kit settings.
Guide on copying, moving, erasing, and exchanging track data.
How to copy specific parts or entire tracks between V-Tracks or locations.
How to move specific portions of data to different locations on tracks.
How to erase specific parts or entire tracks, leaving gaps.
How to erase unnecessary data to free up memory card space.
How to prevent accidental overwriting or deletion of songs.
Explains the Rhythm Guide's function, modes, patterns, and arrangements.
Guide to creating custom arrangements by setting steps, measures, and tempo.
Guide to creating patterns by tapping tracks in time with the metronome.
Steps for creating patterns by inputting sounds measure by measure.
Detailed explanation of insert effect parameters and their settings.
Comprehensive list of parameters for various insert effects.
Detailed explanation of Mastering Tool Kit parameters and their settings.
Comprehensive list of parameters for the Mastering Tool Kit.
Illustrates the physical connection process using a USB cable.
Steps for backing up data to a computer using Windows OS.
Steps for backing up data to a computer using Macintosh OS.
How to convert and save track data into WAV or AIFF files for computer use.
Steps for exporting track data to WAV/AIFF files on Macintosh.
How to load WAV/AIFF files from a computer into BR-864 tracks.
Steps for importing WAV/AIFF files into tracks on Macintosh.
Detailed reference for parameters of insert effects, loop effects, and track EQ.
Guide to diagnosing and resolving common issues with the BR-864.
List of error messages and the steps to resolve them.
