Boss CL-50 - Technical Specifications and Information; Device Specifications; Controls, Switches, and Jacks; Dimensions, Power, and Accessories

Mi
SPECIFICATIONS
Rated Input Level: —10dBm/+4dBm
Input Impedance: 1MQ
Rated
Output
Level:
—10dBm/+4dBm
Output Impedance: 6000
Output Load impedance: over 10kQ
Frequency
Response:
(in)5Hz
to
35kHz
(-+3dB)
Residual
Noise:
Less
than
—98dBm(IHF
-
A)
(Level
Switch:
—10dBm)
Total Harmonic Distortion:
Less than 0.05%
Input Gain: —40 to +12dB
Qutput Gain: --40 to +12dB
Detector In:
(Rated Input Level): —10dBm
(Input Impedance): 47kQ
Compressor/Limiter
Threshold Level:
—40 to +5dBm(Level Switch: —10dBm)
—26 to +19dBm(Level Switch: +4dBm)
Retio: 1:1 to 00:1
Attack Time: 50u5 to 200ms
Release Time: 70ms to 1.5s
Gate
Threshold Level:
—oo to —10dBm (Level Switch: —10dBm)
—oco
to
+4dBm
(Level
Switch:
+4dBm)
Decay
Time:
25ms
to
20s
Controls: Input Level, Output Level
Compressor/Limiter: Threshold, Ratio,
Attack, Release
Gate: Threshold, Decay
Switches: Power, COMP In/Out, Level
Indicators:
Power,
COMP
IN/Out,
Overload,
Gain
Reduction,
Gate
Jacks: Input, Output, Detector in, Stereo Link (Comp,
Gate), COMP Remote, AC Adaptor In
Power: 12V AC (BOSS BRA-120, 220, 240)
Current Draw: 450mA
Dimensions: 218(W) x 44(H) x235(D)mm
8—5/8" (W) X1—3/4" (H) x9—5/16" (D)
Weight: 1.4kg / 3!b 20z
Accessories: AC Adaptor BOSS BRA-120, 220, 240
Foot Rubber x4
Options: Rack Mount Adaptor RAD-50
%
Not
attachable
to
Rack
Mount
Adaptor
RAD
-10.
Foot Switch FS-5L
+
In
the
interest
of
product
improvement,
the
specifi-
cations
of
this unit
are
subject
to
change
without
prior
notice.