Need help?Do you have a question about the Boss Electronic Crossover and is the answer not in the manual?
Find a suitable location in the vehicle to mount the crossover and bolt it securely.
Connect power, ground, and remote terminals with appropriate gauge wire and RCA cables.
Recheck all connections, set controls to minimum, then power up and adjust volume moderately.
Adjusts the low-pass frequency and level for the subwoofer output.
Adjusts high-pass frequency and level for front/rear speaker outputs.
Selects signal source for the low-pass channel (mixed or direct).
Highlights include three-way electronic crossover, adjustable levels, and phase control.
Details input impedance, output levels, crossover frequencies, frequency response, and dimensions.
Addresses signal processor not turning on, low sound level, and background noise.
Advises on safe volume levels, hearing protection, and environmental care for electronics.
To Next Page
General