Need help?Do you have a question about the Boss GE-7 and is the answer not in the manual?
General| Type | Graphic Equalizer |
|---|---|
| Bands | 7 |
| Frequency Centers | 400Hz, 800Hz |
| Level Control Range | +/- 15dB |
| Input Impedance | 1M ohm |
| Output Impedance | 1k ohm |
| Power Supply | 9V battery or AC adapter (PSA series) |
| Dimensions | 73mm (W) x 129mm (D) x 59mm (H) |
| Weight | 450g |
Adjusts harmonic content in seven bands from 100Hz to 6.4kHz with +/-15dB cut/boost.
Adjusts the output loudness to match or contrast with the straight signal.
The unit powers on when a plug is inserted into this jack.
This jack feeds the processed signal to an amplifier.
Features a unique FET switching system for silent, pop-free electronic switching.
Connection point for the BOSS AC Adaptor.
LED indicator shows unit status and helps check battery level.
Provides access to the battery compartment without tools.
Illustrates connections for amplifier, guitar, keyboard, and tape deck using the BOSS GE-7.
Connect all cords and set panel knobs as illustrated before operation.
Depress pedal switch; check LED for 'EFFECT ON' or 'EFFECT OFF' status.
Set Graphic Equalizer sliders to the desired frequency positions.
Adjust LEVEL slider for seamless volume transition between Normal and Effect modes.
Step-by-step guide to open the unit, replace the 9-volt battery, and reassemble.
Remove battery for long periods; replace when voltage drops to maintain performance.
Use only BOSS AC adaptors; other adaptors may cause improper operation or no sound.
Unit powers on with input jack plug-in; unplug when not in use.
To Next Page
