To Next PageTo Next PageWhat to do if the red indicator light is lit on my Boss TGS 1100 Spreader controller?
If the red indicator light is illuminated on your Boss Spreader controller, activate the Blast feature on the controller to clear it.
How to troubleshoot no power to the Boss Spreader controller (green LED not lit)?
If your Boss Spreader controller isn't receiving power (the green LED isn't lit), try the following: * Clean the battery connections. * Replace the fuse. * Ensure the connections are secure.
Why spinner motor runs but spinner and auger do not turn on Boss Spreader?
If the spinner motor runs, but the spinner and auger on your Boss Spreader aren't turning, the bolts connecting the auger and spinner to the motor shaft might be broken. You should replace them.
Step-by-step instructions for mounting the slide-in attachment and spinner protector.
Detailed steps for attaching the spreader to the vehicle's receiver hitch and securing it.
Detailed steps for safely removing the spreader from the vehicle's receiver hitch.
Instructions for mounting the RT3 attachment and leg assembly to the spreader.
Steps to hitch the RT3 attachment to the vehicle and securely lock it in place.
Instructions for safely detaching the RT3 attachment from the vehicle.
Procedures for loading salt into the spreader, including safety precautions.
Guide for installing the in-cab controller in the vehicle's cabin.
Explanation of the controller's buttons, dials, and indicator lights.
Instructions on starting, stopping, and adjusting the spreader using the controller.
Method to resolve auger clogs using the controller's blast feature.
How to adjust the deflector for optimal spread patterns.
Guide to identify and resolve common spreader operational issues.
Table of recommended torque values for various fasteners.
Covers warranty scope, purchaser actions, exclusions, and liability limits.
Covers consumer warranty scope, purchaser actions, exclusions, and liability limits.
General