Boss Vocal Performer VE-20 User Manual

Español Português NederlandsItalianoFrançaisDeutschEnglish
Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” and “IMPORTANT
NOTES” (supplied on a separate sheet).
These sections provide important information concerning the proper operation of the unit.
Additionally, in order to feel assured that you have gained a good understanding of every feature
provided by your new unit, this manual should be read in its entirety. The manual should be saved and
kept on hand as a convenient reference.
Main Features
Q A versatile array of vocal effects, controlled by a single knob
• Thirty different sounds are ready for immediate use
• Just turn the knob to select an effect, and you’ll hear it immediately
Q Numerous high-quality effects
• “Reverb” and “Delay” add spaciousness and depth to your voice
• Two-part “Double/Harmony” adds beautiful resonance and warmth to your voice
• “Dynamics” makes the volume consistent, and “Pitch Correct” ensures accurate pitch
• Use unique effects like “Distortion” or “Radio” to create distinctive performances
Q Pedal functions for live performance
• Phrase Loop lets you repeatedly overdub your voice to create a vocal ensemble in real
time as you perform
• You can use the HARMONY pedal to turn the Harmony effect on/off in realtime
Copyright © 2009 BOSS CORPORATION
All rights reserved. No part of this publication may be reproduced in
any form without the written permission of BOSS CORPORATION.
VE-20_e.book 1 ページ ２００９年７月３０日 木曜日 午後８時１３分

Boss Vocal Performer VE-20 Specifications

General

Brand	Boss
Model	Vocal Performer VE-20
Category	Computer Hardware
Language	English

Summary

Main Features

A versatile array of vocal effects, controlled by a single knob

Controls vocal effects via a single knob, offering immediate selection and use of thirty ready sounds.

Numerous high-quality effects

Features high-quality effects like Reverb, Delay, Double/Harmony, Dynamics, and Pitch Correct for vocal enhancement.

Pedal functions for live performance

Enables live performance control through features like Phrase Loop and Harmony pedal for real-time adjustments.

Quick Start

1. Getting ready

Connects the microphone and output devices, and sets the initial input sensitivity for optimal performance.

2. Sing

3. Switching sounds

4. Using the HARMONY pedal

Explains how to activate the Harmony effect by pressing the dedicated HARMONY pedal.

Making the Connections

Sounds and Effects

Adjusting the level of the Reverb effect

Adjusting the level of the Delay effect

Adjusting the Harmony effect

Covers matching harmony to song key and adjusting harmony part volumes.

Editing the effects

Step-by-step guide on how to edit individual effect parameters within a sound.

Using Phrase Loop to Layer Your Voice

Convenient Functions

Using the HARMONY pedal to turn effects other than Harmony on/off

Details how to assign other effects (like Delay) to the HARMONY pedal for toggling.

Using the pedals to switch sounds

Using your recorded voice to make adjustments (Sound Check)

Saving a sound as a different User Sound

Specifying the type of output (Stereo or Mono/Dry)

Using a condenser mic (Phantom Power)

Appendix

Restoring the factory settings (Factory Reset)

Parameter guide

Detailed explanations of all editable parameters for DYNAMICS, PITCH CORRECT, TONE/SFX, DOUBLE/HARMONY, DELAY, and REVERB effects.

Troubleshooting

Main Specifications