This document describes the Bossini FRAME RGB LED Lights Cromotherapy shower heads, offering installation, usage, and maintenance instructions.
Function Description
The Bossini FRAME series offers a range of shower heads with RGB LED lights for chromotherapy, providing a multi-sensory shower experience. The series includes both single-function and multifunction models, designed for either new installations or as retrofits for existing shower heads. The chromotherapy feature allows users to select different light colors to enhance their showering experience.
Important Technical Specifications
Electrical Equipment:
- Voltage: 220-230V~ 50 Hz (standard version) or 115V 50-60 Hz (version on demand).
- Power: Max 20W.
- Protection Class: II.
- External Cable Diameter: Max 8.5mm.
- LED Bar: 106 low voltage LEDs.
- Safety Transformer: 230V~ / 10V= 50 Hz, to be installed outside the safety area (in compliance with DIN VDE 0100, part 107 – according to CEI 64/8 prescription).
- Grade of Protection (IP Rating): IP67.
- Remote Control Switch: Waterproof, but it is recommended not to use it under direct water spray.
- Safety Mark: CE.
- Conformity: EN300, EN301, EN303, EN 61000, EN 60335, EN 60529, EN 62471.
- Time-Out Function: If no commands are sent to the system, a time-out function automatically shuts the system off after approximately 30 minutes.
- Residual Current Device (RCD): Power should run through the wiring with the aid of an RCD possessing a working residual current no higher than 30mA.
Product Weights (approximate):
- HI0001 - FRAME: Max 4.0 kg (dry).
- HI0391 - FRAME/1 (1 Spray): Max 13.8 kg (dry), Max 15.3 kg (with water).
- HI0925 - FRAME/2 (2 Sprays): Max 15.5 kg (dry), Max 16.5 kg (with water).
- HI0926 - FRAME/2 (2 Sprays): Max 15.5 kg (dry), Max 16.5 kg (with water).
- HI0927 - FRAME/3 (3 Sprays): Max 17.0 kg (dry), Max 18.0 kg (with water).
- HI0930 - FRAME/3 (3 Sprays NEB): Max 17.0 kg (dry), Max 18.0 kg (with water).
- HI0928 - FRAME/4 (4 Sprays NEB): Max 18.0 kg (dry), Max 19.0 kg (with water).
- HI0929 - FRAME/4 (4 Sprays KNEIPP): Max 18.0 kg (dry), Max 19.0 kg (with water).
Flow Rates:
- All models (HI0391, HI0925, HI0926, HI0927, HI0930, HI0928, HI0929) have a minimum flow rate of 16 L/min.
Dimensions:
- FRAME (HI0001): 600mm x 500mm (overall), 460mm x 360mm (inner frame), 70mm (side frame width), 19mm (thickness), 2mm (edge).
- FRAME SINGLE FUNCTION: 600mm x 500mm (overall), 1/2" GAS M connection. Height from ceiling to bottom of shower head: 78.5mm to 97.5mm.
- FRAME MULTIFUNCTION: 600mm x 500mm (overall), 1/2" GAS M connections. Height from ceiling to bottom of shower head: 83.5mm to 102.5mm.
- Minimum False Ceiling Height: 120mm.
- Junction Box Minimum Dimensions: 190x190x70mm.
- Recommended Installation Height for Shower Head: 1100mm from the floor.
Usage Features
The FRAME series offers chromotherapy through RGB LED lights, controlled by a remote switch.
- RGB ON: Activates the RGB LED lights.
- COLOR STOP!: Pauses the current color.
- RGB OFF: Turns off the RGB LED lights.
- Automatic Shut-off: If no commands are received for approximately 30 minutes, the system automatically turns off.
The shower heads come in various configurations:
- FRAME/1: Single spray function.
- FRAME/2: Two spray functions.
- FRAME/3: Three spray functions, including a NEB (nebulized) jet option.
- FRAME/4: Four spray functions, including NEB (nebulized) and KNEIPP jet options.
Maintenance Features
General Recommendations for Proper Use:
- System Flushing: Always flush out the water supply system before connecting the shower head to prevent impurities or debris from causing functional problems.
- Water Filter: It is recommended to install a filter at the system's water intake.
- Diffuser Cleaning: To prevent lime scale from clogging the diffuser, periodically rub the silicone nozzles to free them of deposits and keep the diffuser clean.
Cleaning Instructions:
- Metal Parts: Water contains calcium that can deposit on surfaces, forming unsightly spots. For routine cleaning, use a damp cloth with a little soap, rinse, and dry. Drying after each use can prevent calcium spots.
- Important Note on Detergents: Only use soap-based detergents. Never use abrasive detergents or disinfectants, or those containing alcohol, hydrochloric acid, phosphoric acid, bleach, or chlorine.
- Silicone Nozzles (Easy-Clean System): The shower head is equipped with "Easy-Clean" silicone nozzles. These nozzles are highly heat-resistant and expand with hot water, detaching the first layer of calcium. Periodically rubbing the silicone nozzles manually helps remove calcium, ensuring the shower remains perfect.
- Warranty: The warranty on the product's surface is not valid if the material undergoes treatment different from what is suggested. The warranty does not cover damage caused by calcium deposits or impurities.
Troubleshooting (LEDs Not Functioning):
- Check Installation: Verify the correct electrical installation.
- Replace Fuses:
- F1 (Input 220-230V): Ø5x20mm, 1A, 250V.
- F2 (Output 10VDC): Ø5x20mm, 3.15A, 10V.
Battery Replacement (Remote Control - Model CR2016):
- Use a small screwdriver to open the remote control.
- Carefully remove the old CR2016 battery.
- Insert a new CR2016 (LI-Mn 3V) battery, ensuring correct polarity (+ side up).
- Close the remote control.
- Dispose of the old battery responsibly according to local regulations.
Warranty Terms:
- The product is covered by a 2-year warranty against manufacturing defects.
- The warranty does not cover damages from improper installation, neglect, incorrect plumbing, normal wear and tear, lime scale deposits, impurities, or the use of unapproved cleaning products.
- Bossini is not responsible for labor costs or damages incurred during installation, repair, or replacement.
- Warranty claims require a dated proof of purchase (e.g., receipt, invoice).
- Defective parts must be returned to Bossini, carriage-free, with a report describing the defect. Bossini reserves the right to inspect the part to evaluate warranty applicability.
- The warranty period begins on the purchase date and is not renewable.