To Next PageTo Next PageWhy does my Bostitch BTC400LB Drill shut off abruptly?
Your Bostitch Drill might shut off abruptly because the battery pack has reached its maximum thermal limit or because it is out of charge. To maximize the life of the battery pack, it is designed to shut off abruptly when the charge is depleted.
What to do if my Bostitch Drill battery pack will not charge?
If your Bostitch Drill's battery pack won't charge, here are a few things to check: 1. Ensure the battery pack is fully inserted into the charger until the LED illuminates. 2. Verify that the charger is plugged into a working outlet. 3. Make sure the surrounding air temperature is between 40 degrees F (4.5 °C) and 105 degrees F (+40.5 °C). If it's too hot or cold, move the charger and battery pack to a more suitable environment.
Why will my Bostitch BTC400LB not start?
If your Bostitch Drill won't start, it could be due to the following reasons: * The battery pack might not be installed properly; check its installation. * The battery pack might not be charged; verify its charging requirements.
General| Type | Cordless Drill |
|---|---|
| Voltage | 20V |
| Chuck Size | 1/2 inch |
| Max Torque | 400 in-lbs |
| Speed | 0-600 / 0-2000 RPM |
| Battery Type | Lithium-Ion |
| Weight | 3.5 lbs |
