Need help?Do you have a question about the Boston Acoustics Lynnfield VR-M50 and is the answer not in the manual?
General| Type | Bookshelf |
|---|---|
| Configuration | 2-way |
| Tweeter | 1 inch |
| Impedance | 8 Ohms |
| Sensitivity | 89 dB |
| Power Handling | 15-150 Watts |
| Woofer | 5.25 in (130mm) |
| Frequency Response | 55Hz - 20kHz |
Specifies the speaker's frequency range with a +/- 3dB tolerance.
Indicates the suitable power range for amplifiers driving the speakers.
States the electrical impedance of the speakers, measured in ohms.
Measures speaker output level for a given input power (1 watt at 1 meter).
Details the specifications of the speaker's bass driver.
Details the specifications of the speaker's high-frequency driver.
Specifies the frequency at which audio signals are divided between drivers.
Provides the height, width, and depth of the speaker cabinets.
States the weight of each speaker in pounds and kilograms.
Describes the exterior finish options for the speaker cabinets.
Guide to identifying and connecting speaker wire conductors correctly.
Instructions on how to connect speaker cables using binding posts.
Standard procedure for connecting speakers to an amplifier.
Explanation and steps for bi-wiring speaker connections.
Method for verifying correct speaker polarity and phase.
Guidance on optimal speaker positioning for soundstage.
To Next Page
