Boston Acoustics Pro50 - User Manual

50
Specifications Pro50
Nominal Size 5
1
/4"
RMS Power Handling 125 watts
Peak Power Handling 250 watts
Nominal Impedance 3 ohms
Frequency Response 60Hz–22kHz (+/- 3dB)
Sensitivity 90dB (1watt @ 1meter)
High Performance 5
1
/4-inch Component Speaker System
# Description Quantity
1 Pro50 Woofer 2
2 Type-M2 1" Alloy Dome Tweeter 2
3 Pro50 Woofer Crossover 2
4 Pro50 Tweeter Crossover 2
5 Tweeter Grille 2
6 Tweeter Axis-Mount 2
7 Tweeter Flush-Mount 2
8 Tweeter Angle-Mount (top) 2
9 Tweeter Angle-Mount (bottom) 2
10 Adapter Plate 2
11 Woofer Gasket 2
not shown Woofer Hardware Package 1
12 Boston Hex Tool 1
13 Woofer Grille 2
14 Small Gold Terminal 2
15 Large Gold Terminal 2
16 Crossover Bridge 2
not shown Tweeter Hardware Pack 2
17 Axis-Mount Screws 4
18 Spring Clips 4
19 Compact Gold Terminals 4
20 Axis-Mount Stand-Off 2
21
3
/8" Pan Head Screw 2
22 1" Pan Head Screw 2
not shown
1
/2" Pan Head Screw 2
23 1
1
/8" Socket Button Head Screw 16
24 1
1
/2" Hex Nut 2
25
1
/2" Self-Tapping Screw 4
26 1" Self-Tapping Screw 4
27
3
/32" Hex Bit
1
2
1
/ 4 "
57mm
5
3
/ 16 "
131
mm
6
7
/ 16 "
1
63mm
1
7
/ 16 "
3
6mm
1
5
/ 8 "
40mm
6
1
/ 2 "
165mm
3
11
/ 16 "
94mm
2
1
/ 16 "
52mm
1
1
/ 2 "
38mm
1
11
/ 16 "
42mm
2"
51mm
1
3
/ 4 "
45mm
3
/ 4 "
19mm
1"
26mm
Boston Acoustics, Inc.
3
0
0 Jubilee Drive, Peabody
, MA 01960 USA T: 978.538.5000 F: 978.538.5100 W: bostonacoustics.com
Boston, Boston Acoustics, and the Boston Acoustics logo are registered trademarks of Boston Acoustics, Inc.
Specifications are subject to change without notice.
© 2004 Boston Acoustics, Inc. All rights reserved. Covered by patents issued and/or pending.
042-002120-0

Summary

Boston Component Speaker System Overview

Product Specifications

Key technical details of the speaker system, including power handling, impedance, and frequency response.

Included Components and Hardware

List of all parts and hardware supplied with the speaker system for installation and use.

Speaker Installation and Configuration Options

Tweeter Mounting Methods

Instructions and diagrams for Axis-Mount, Flush-Mount, and Angle-Mount tweeter installations.

Tweeter Installation and Attenuation

Guidance on installing the tweeter and adjusting its sound output level.

Component Configuration

Diagrams illustrating different ways to configure the speaker system's components.

Crossover Wiring Configurations

Illustrations of various crossover connections, including single input, bi-wire, daisy chain, and all connected.

Boston Acoustics Pro50 Specifications

General

Impedance	4 ohms
Size	5.25 inches
Design	2-way
Power Handling (RMS)	50W
Woofer Size	5.25 inches