Need help?Do you have a question about the Boston Acoustics TVee 10 and is the answer not in the manual?
Verify all components are present after opening the box.
Place the soundbar and turn on your television for initial setup.
Connect the soundbar to your audio source, typically via optical cable.
Plug the soundbar into a power outlet.
Turn off your television's built-in speakers to avoid audio conflicts.
Choose the correct audio input and adjust the volume level.
Put the soundbar into a special mode to learn remote commands.
Teach the soundbar to recognize the Mute command from your remote.
Assign unused TV remote buttons for soundbar functions like input selection.
General| Backlight | Yes |
|---|---|
| Product color | Black |
| Recommended usage | Universal |
| Suitable for outdoor use | - |
| Number of drivers | 2 |
| Speaker placement | Floor |
| Audio output channels | 2.0 channels |
| Subwoofer driver diameter (imperial) | 5 \ |
| Impedance | - Ω |
| Frequency range | 70 - 20000 Hz |
| RMS rated power | - W |
| Headphone outputs | 1 |
| Headphone connectivity | 3.5 mm |
| AC input voltage | - V |
| AC input frequency | - Hz |
Weight and Dimensions| Depth | 800 mm |
|---|---|
| Width | 83 mm |
| Height | 73.5 mm |
| Weight | 2100 g |
To Next Page
