2
Specifications
Frequency Response (±3dB) 65–20,000Hz
Recommended Amplifier Power 15–150 watts
Nominal Impedance 8 ohms
Sensitivity [1 watt (2.83v) at 1m] 89dB
Bass Unit 5
1
⁄4" (135mm) copolymer
Passive Radiator 5
1
⁄4" (135mm) copolymer
Tweeter 1" (25mm) dome with AMD
Crossover Frequency 3,000Hz
Dimensions (HxWxD) 6
1
⁄4
x 19
1
⁄2
x 6
3
⁄4
" (159 x 495 x 171mm)
Weight 14 lbs (6.5kg)
Finish Charcoal grey grille cloth with
cherry or black ash wood veneer sides
and solid cherry or black ash wood top
Description
The Lynnfield VR-MC center channel speaker delivers the wide-range response, high power-handling, high
efficiency and placement flexibility required by the finest home theater systems. Its wide and even dispersion
ensures that the sound will remain consistent and uniform for listeners throughout the room, assuring that
everyone has the “best seat.”
Placement
Place the center channel speaker
above or below the television
monitor, as close as possible to
the center of the screen. It is not
necessary to angle the speaker to
face the listeners. The speaker
is magnetically shielded with
MagnaGuard
®
and will not affect
the television’s picture. Use the
four self-adhesive rubber feet
(provided) to protect the TV’s
finish and reduce vibration.
Connection
WARNING: To prevent an electrical shock hazard, always switch off the amplifier or receiver when making
connections to the speaker.
We recommend 18-gauge, or thicker, wire for runs up to 25 feet (8m) and 16-gauge, or thicker, wire for longer
runs. Separate the first few inches of the wire conductors. Strip off
1
⁄2 inch (12mm) of insulation from the ends
of each speaker wire to expose the two conductors and tightly twist the wire strands.
To Next Page
Loading...
