ACCESSORY INSTALLATION
INSTRUCTIONS
STEREO
Installation Instructions for the 130, 150 & 170 Super Sport
Issue Date
05/11/2010
Rev: C
PROCEDURE NO.
AI-MS-012
1. PURPOSE
Provide step-by-step procedure for the stereo
installation.
2. SCOPE
This procedure is limited to the stereo
installation on the 130, 150 & 170 Super Sport.
3. DEFINITION
3.1. Not Applicable
4. RESPONSIBILITY
4.1. Not Applicable
5. TOOLS/EQUIPMENT REQUIRED
5.1. Drill
- 1/8” drill bit
- 11/16” drill bit
- 1/2” drill bit
- 9/64” bit w/countersink
- 3/4” hole saw
- Phillips head bit
5.2. Marine Sealant
5.3. Pliers
5.4. Vise grip “C” clamp
5.5. Measuring Tape
5.6. Pencil
6. SAFETY
6.1. Safety glasses or goggles are recommended.
7. FORMS
7.1. Not applicable
CONTENTS OF KIT PART#
JENSEN STEREO....................................1950779
ANTENNA.................................................1950780
MP3 INPUT...............................................1820320
WIRING HARNESS..................................1948329
STEREO ADAPTER.................................1952631
ACCESSORY SWITCH ............................1948897
KNOB........................................................1733593
STEREO LABEL.......................................1952378
SPEAKERS (2).........................................1690555
SPEAKER BOX ........................................1955994
HARDWARE PKG ...................... 901-BWSTEREO
Page 1 of 11
130SS Stereo Location 150 & 170SS Stereo Location
To Next Page
Need help?
General