To Next PageTo Next Page
Need help?Do you have a question about the Bottari Recharge-10 6V and is the answer not in the manual?
Details the main operational buttons, indicators, and their visual feedback on the charger's control panel.
Explains the procedure for selecting either 6V or 12V charging modes via the voltage selection switch.
Details the operation of the power switch, emphasizing correct voltage selection before activation.
Describes the function of various LEDs, indicating power, faults, charging status, and completion.
Explains the use of the adjustable knob to set the appropriate charging current for the battery.
Provides guidance on using the ammeter to select the correct charging current for different battery capacities.
Details the correct procedure for connecting the charger's clamps to the battery terminals, including polarity.
Explains how to plug into the power supply, select voltage, switch on, and begin the charging process.
Describes the charger's behavior when the battery is fully charged, maintaining a safe voltage.
Provides instructions on how to clean the charger casing and display using soft cloth and neutral agents.
Warns against grinding metals near the charger and suggests cleaning with compressed air in such environments.
Outlines the general warranty terms, duration, and procedures for claims and repairs.
Lists specific types of damage and misuse that are not covered under the warranty terms.
General| Output Voltage | 6V DC |
|---|---|
| Output Current | 1A |
| Battery Type | Lead-acid |
| Protection Features | Overcharge protection, Short circuit protection, Reverse polarity protection |
| Indicator | LED indicator for charging status |
