EasyManua.ls Logo

Bottecchia ETR 3 - Safety Precautions and Quick Start; Quick Start Guide

Bottecchia ETR 3
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
Safety precautions
• Please follow the instructions provided in this manual for your bike safety.
• Check the battery and battery charger regularly, especially the cable, the plug and
the battery casing. If battery or charger are damaged, they do not have to be used
until they are repaired.
• Please follow the safety precautions provided in this manual when using an e-bike.
This bike is not suitable for use by children, people with reduced physical, mental
or sensory abilities or without the necessary experience and knowledge unless they
are supervised or have received the right instructions for the use of the bike from a
person responsible for their safety.
• In case of any problem or error, consult the nearest dealer.
• Do not modify the electrical system. This could be illegal, cause malfunctions and
cause the warranty decay.
• The product has been designed to be water resistant so it can be used even when it
rains. In any case it cannot be deliberately immersed in water.
• Do not clean the e-bike with the hydro cleaner. If water enters some components,
problems may arise.
• When carrying the bike on a high-speed vehicle exposed to rain, remove the battery
and store it in a safe place away from rain.
• Handle the bike with care and avoid any kind of strong impact.
• Use a well-wrung wet cloth to clean the battery casing.
• For any questions regarding the maintenance and use of the product, please contact
the dealer where you purchased the bike.
• We advise you to use your e-bike for the rst time on a safe ground.
Quick start
In this section, you will nd important information and instructions to know your e-bike
as soon as possible.
• Read all safety precautions.
• Completely charge the battery
• If not assembled, assemble the battery
• Lock the battery with the use of the key.
• Press the “start” button on the remote control on the handlebars: the system will
switch on.
• Select the assistance level through the control unit.
The bike is now ready to be used.