Step 3: Push out the pin
Apply gentle pressure on the tool to push the pin out of
the link. The pin should come out partially from the
other side.
Step 4: Remove the pin
Once the pin is partially out, use your fingers to pull it
out completely.
Step 5: Re-attach the clasp
After removing the desired links, insert back the link pin
to fix it properly and reattach the watch strap clasp.
Step 6: Check the fit
Try on the watch to see if it fits comfortably. If it's still
too loose, you may need to remove more links. If it's too
tight, you might need to add one or more links back.
How to use steel strap adjuster?
Step 1: Identify the metal links to remove
Turn the watch upside down and locate the metal pins
that hold the links together. These pins will be found on
the side of the metal links and marked with an arrow
indicating the direction to remove them.
Step 2: Position the tool
Insert the tool tip into the small hole on the link's pin
head. Make sure the tool is positioned perpendicular t
o the link.
To Next Page
Loading...
