Using area: Tablet PC , Laptop, Desktop Computer.
Pairing steps:
1.Take out the nano receiver from the slot on the
buttom case;
2. Plug the nano receiver into an available USB port on
your computer;
3. Unfold the mouse to turn it on , now your mouse will
connect to your computer automatically.
Power on/off : Fold the mouse to turn it on. Unfold the
mouse to turn it off.
Wireless Mouse
Instruction
Specifications
MW162
Working Hz: 2.4G
Modulation: GFSK
Voltage: 3.7V
Working current: ≤4.5mA
Starting current: ≤12.5mA
Awak up: pressing any key
Low voltage demand: ≤3.0V
Charging time: 2.5H
Working time: 60H
Working distance: >8m(open space and straight distance )
Sleeping time: about 10 minutes ( no any pressing )
Battery life: 300 times circulation
Standby time: 30 days
DIP resolution rate: 800-1200-1600
To Next Page
General