www.etractorimplements.com 12
ASEMBLE INSTRUCTION
The machine comes from the factory in a
shipping configuration. Always use tools
equipment and forklifts of appropriate size and
capacity for the job. Always use 2 men when
lifting, moving and assembling the machine.
When the machine is shipped, follow this
procedure when preparing for the customer:
1. Clear the area of by standers especially
small children before starting.
2. Use a forklift to lift the pallet/machine from
the truck. Carry the load close to the
ground.
3. Move the machine to the assembly area.
Be sure there is sufficient clearance to
access the machine from all sides. BX52
BX62R
To Next Page
Loading...