Bowens ESPRIT GEMINI GM200 - User Manual

ESPRIT GEMINI INSTRUCTIONS BWL-0353/2 (05/07)
BOWENS INTERNATIONAL LIMITED
355 Old Road
Clacton on Sea
Essex CO15 3RH UK
Tel: +44 (0)1255 422807
Fax: +44 (0)1255 436342
www.bowens.co.uk

Summary

Introduction

Safety Notes

Control Panel Guide

Rear Control Panel

Overview of controls located on the rear panel of the Esprit Gemini unit.

Side Control Panel

Overview of controls located on the side panel of the Esprit Gemini unit.

Accessories

Pulsar Radio Trigger System

Connecting & Using the Esprit Gemini

Mounting

Instructions for mounting the Esprit Gemini unit onto a support system.

Flash Tube Replacement

Battery Solutions

Operating Features

Fitting the Modelling Lamp

Guide on how to correctly fit the modelling lamp into the Esprit Gemini.

Flash Power Control

Explanation of the flash power output control and settings.

Modelling Lamp Control

Details on how to control the modelling lamp's behaviour and output.

Fuse

Information regarding the unit's fuse protection and replacement.

Audible Ready Beep

Instructions for enabling the audible signal for unit readiness.

Synchronisation

Methods available for triggering the Esprit Gemini unit.

Fitting; Removing Reflectors

Procedure for attaching and detaching reflectors from the unit.

Bowens ESPRIT GEMINI GM200 Specifications

General

Power Output	200Ws
Color Temperature	5600K
Maximum Power	200Ws
Power Adjustment Range	5 stops
Recycling Time	1.3s
Guide Number	45 (ISO 100, with standard reflector)
Compatibility	Bowens S-fit mount