Need help?Do you have a question about the Bowers & Wilkins 600 Series and is the answer not in the manual?
General| Amplifier Power Output | 200W |
|---|---|
| Type | Active Subwoofer |
| Driver Size | 10-inch |
| Frequency Range | 25Hz - 140Hz |
| Frequency Response | 25Hz - 140Hz (±3dB) |
| Amplifier Power | 200W |
| Signal / Noise | 90dB |
| Functions | Auto On/Off, Phase Switch, Low Pass Filter |
| Inputs | Line-level (RCA), Speaker-level |
| Outputs | Speaker-level |
| Height | 380mm |
| Width | 310mm (12.2 in) |
| Depth | 380mm |
| Weight | 15.5kg |
Explains graphical symbols used for warnings and operating instructions.
Lists essential safety precautions for operating the apparatus.
Provides introduction, environmental info, and carton contents checklist.
Guides on physical placement, installation, and electrical connections.
Describes the power modes (On, Auto, Standby) and status indicator.
Details initial settings for subwoofer controls, including Home Theatre and 2-Channel Audio.
Explains fine-tuning steps for Home Theatre and 2-Channel Audio systems.
Explains the function of Bass Extension and EQ switches for various uses.
Offers guidance on cleaning and maintaining the subwoofer's cabinet.
Outlines the terms, conditions, and limitations of the product warranty.
Details compliance with North American and EU safety and EMC standards.
To Next Page