Need help?Do you have a question about the Bowers & Wilkins 705 S2 and is the answer not in the manual?
General| Type | 2-way vented-box system |
|---|---|
| Frequency Response | 50Hz - 28kHz ±3dB |
| Frequency Range | -6dB at 45Hz and 33kHz |
| Sensitivity | 88dB spl (2.83Vrms, 1m) |
| Nominal Impedance | 8Ω (minimum 3.7Ω) |
| Recommended Amplifier Power | 30W - 120W into 8Ω on unclipped programme |
| Weight | 9.3kg (20.5 lb) |
| Finishes | Gloss Black, Satin White, Rosenut |
| Crossover Frequency | 3kHz |
| Tweeter | 1x 25mm (1 in) Decoupled Carbon Dome high-frequency |
| Midrange/Woofer | 1x 165mm (6.5 in) Continuum cone bass/midrange |
| Dimensions | 407mm x 200mm x 301mm (H x W x D) |
| Features | Flowport |
Lists items included in the product packaging.
Details product compliance with international directives and disposal guidance.
Guidance on primary mounting and optional shelf placement for optimal performance.
Adjusting speaker position for optimal sound quality and stereo image.
Specific placement advice for conventional stereo and home theatre systems.
Advises keeping sensitive articles away from speaker magnetic fields.
Explains conventional and bi-wiring/amplification terminal connections.
Adjusting bass volume and speaker/listener position for room acoustics.
Details how to use supplied foam bungs for low-frequency adjustment.
Guidance on floor stand setup, spikes, and mass-loading.
Describes how speaker performance changes during the initial listening period.
Instructions for cleaning cabinets and maintaining wood veneer finishes.
To Next Page