Need help?Do you have a question about the Bowers & Wilkins CWM CINEMA and is the answer not in the manual?
General| Type | In-wall speaker |
|---|---|
| Impedance | 8Ω (minimum 4.5Ω) |
| Depth behind surface | 95mm (3.7in) |
| Crossover Frequency | 4kHz |
| Power Handling | 25W - 150W |
| Frame width | 8.3" (210mm) |
Instructions for unpacking the speaker, checking contents, and storing packaging.
Guidance on checking for conflicts with other installations and mapping wall construction.
Positioning advice for stereo and front home theatre speakers, including spacing and height.
Guidance on the best placement for centre channel speakers relative to the screen.
Advice on positioning surround speakers for diffuse sound and optimal listening.
Explanation of the Tilt Axis switch for directing sound off-axis towards the listener.
Instructions on using foam pads and wadding to damp the wall cavity behind drive units.
Steps for fitting the wall frame in both new and existing construction.
Detailed steps for fitting the pre-mount frame in existing construction using a template.
General advice for aligning and tightening the frame in all installation methods.
Instructions for installing an IR sensor using the provided pilot hole.
Guidance on painting the frame and warnings about touching drive units.
Instructions for connecting the speaker, ensuring correct polarity and cable choice.
Explanation of the HF controls for adjusting high-frequency output.
Details of the speaker's drive units, including mid/bass and high-frequency drivers.
The specified frequency range and tolerance for the speaker.
The speaker's sensitivity rating in dB spl.
The standard impedance rating of the speaker.
The frequency at which the speaker's crossover operates.
The recommended range of amplifier power for optimal performance.
Information about the speaker's protection mechanism.
Dimensions of the speaker's wall frame.
Required wall opening dimensions without using a pre-mount frame.
Required wall opening dimensions when using a pre-mount frame.
The minimum required wall depth for installation.
Details on the speaker's finish and suitability for customisation.
Information about the optional pre-mount frame accessory.
To Next Page