I 4960
CWM™Cinema
Drive units
Frequency response
Sensitivity
Nominal impedance
Crossover frequency
Recommended
amplifier power
Protection
Frame size
Cut-out size without
pre-mount frame
Cut-out size with
pre-mount frame
Min depth required
Finishes
Pre-mount frame (optional)
2x 135mm (5
1
/4in) Kevlar
®
mid/bass1x 25mm (1in) metal
dome high-frequency
55Hz – 20kHz ±3dB
91dB spl (2.83V, 1m)
8Ω
3.5kHz
20W – 150W continuous into 8Ω
on unclipped programme.
Auto-Reset Polyswitch
Height: 255mm (10in)
Width: 371mm (14
5
/8
in)
Height: 220mm (8
5
/
8in)
Width: 337mm (13
1
/
4in)
Height: 226mm (8
7
/8
in)
Width: 343mm (13
1
/
2in)
85mm (3
3
/
8in) From wall surface
Semi-matt white suitable for
customising or pre-painting
PMK™800
Kevlar is a registered trademark of DuPont.
B&W Loudspeakers Ltd. reserves the right to amend details of the specification without notice in line with technical developments.
Copyright © B&W Loudspeakers Ltd. Printed in England.
B&W Loudspeakers Ltd, Meadow Road, Worthing, BN11 2RX Tel: +44 (0) 1903 524801 Fax: +44 (0) 1903 524725
B&W Loudspeakers of America, 54 Concord Street, North Reading, MA 01864-2699, USA Tel: (1978) 664 2870 Fax: (1978) 664 4109
http://www.bwspeakers.com
To Previous Page
Loading...
Need help?
General
