Need help?Do you have a question about the Bowers & Wilkins CCM382 and is the answer not in the manual?
General| Product color | Black, Grey |
|---|---|
| Recommended usage | - |
| Suitable for outdoor use | No |
| Tweeter | Yes |
| Speaker type | 2-way |
| Woofer diameter | 200 mm |
| Tweeter diameter | 25 mm |
| Number of drivers | 2 |
| Speaker placement | Ceiling-mountable |
| Audio output channels | 1.0 channels |
| Driver diaphragm material | Polypropylene |
| Number of tweeter drivers | 1 |
| Woofer diameter (imperial) | 8 \ |
| Tweeter diameter (imperial) | 1 \ |
| Impedance | 8 Ω |
| Sensitivity | 90 dB |
| Frequency range | 45 - 3000 Hz |
| RMS rated power | 80 W |
| Connectivity technology | Wired |
Position speakers for background audio, avoiding corners for emphasized low frequencies.
Locate stereo speakers between 3m-5m apart and similar distance in front of listening area.
Position front/centre speakers near screen, surrounds behind listening position.
Mark and cut the ceiling aperture, and route speaker cable through it.
Connect speaker cable to terminals and insert/secure speaker using dog clamps.
Align and attach the magnetic grille to the speaker frame.
Attach straps to moulding, secure to studwork, and use moulding as a cut guide for sheetrock.
Fit back-box to studs, seal cable glands, and seal flanges after sheetrock installation.
To Next Page
