Need help?Do you have a question about the Bowers & Wilkins CCM20 and is the answer not in the manual?
General| Type | In-ceiling speaker |
|---|---|
| Impedance | 8Ω |
| Nominal impedance | 8Ω |
| Crossover Frequency | 4kHz |
| Pre-mount kit | Yes |
| Back box | Optional |
| Drive units | 1 x 6.5" (165mm) bass / 1 x 1" (25mm) tweeter |
| Frequency range (-6dB) | 38Hz - 50kHz |
| Sensitivity | 88dB |
| Sensitivity (1W, 1m) | 88dB |
| Power Handling | 100W |
| Recommended amplifier power | 25 - 100W |
| Depth behind surface | 95mm (3.7in) |
| Description | Two-way ceiling loudspeaker |
Instructions for unpacking the loudspeaker components, including checking the contents.
Guidance on speaker placement, avoiding conflicts and considering cavity volumes.
Instructions for connecting the speakers to the amplifier, including polarity and cable choice.
Advice on filling the ceiling cavity with damping material for optimal sound.
Instructions for fitting the frame, marking the ceiling and cutting the aperture.
Details on screwing the frame and clamping dogs to secure it in the ceiling.
To Next Page