Need help?Do you have a question about the Bowers & Wilkins CCM632 and is the answer not in the manual?
Lists all parts provided in the package for speaker installation.
Overview of the first steps in the speaker installation process.
Steps for preparing the ceiling opening and installing the mounting template.
Connecting the audio cables and securing the speaker body into the ceiling.
Process for attaching the speaker grille for a finished appearance.
Steps for ceiling cutout using an alternative template method.
Connecting wires and installing the speaker body using an alternative approach.
Attaching the speaker grille via magnetic connection.
Detaching the speaker grille to access the unit.
Disconnecting audio wires and releasing the speaker from its mounting.
Final steps to detach and remove the speaker from the ceiling.
General| Type | In-ceiling speaker |
|---|---|
| Impedance | 8Ω |
| Impedance Nominal | 8Ω |
| Driver | 6.5” (165mm) bass/midrange |
| Tweeter | 1in |
| Frequency Range (-6dB) | 38Hz - 20kHz |
| Frame Diameter | 240mm |
| Cut-out Diameter | 210mm |
| Cutout Size | 196mm (7.7in) |
| Protrusion | 0mm |
| Description | Two-way in-ceiling loudspeaker |
| Drive Units | 1x ø130mm (5in) Polypropylene cone bass/midrange 1x ø25mm (1in) soft dome tweeter |
To Next Page