Bowers & Wilkins DM560 User Manual

DM560
Stand-mount/Bookshelf loudspeaker system
Product Summary
●
The two way front vented system encompasses the same design technology of the DM550
with its rigid one-piece baffle construction, but offers a noticeable extended bass – thanks to
a bigger 8in bass/midrange driver and increased enclosure size.
Technical highlights
●
B&W's Tweeter technology ensures that the sound remains focused and time sensitive and
that the stereo image is presented with unparalleled three dimensional accuracy.
●
The cabinets feature a specially designed high density front baffle which achieves almost
Matrix-like stability in strengthening overall enclosure construction. The bevel edges of the front
moulding reduce diffraction and improve dispersion.
●
The crossover components use heavy gauge wire throughout and new drivers guarantee not
only high reliability but ensure that top specifications are met.
B&W Loudspeakers Ltd reserves the right to amend details of the specifications without notice in line with technical developments. E & OE. All trademarks acknowledged.
www.bwspeakers.com
Drive Units
Frequency Response
1 x 26mm high-frequency with
aluminium dome, 26mm coil on
aluminium dome former, wound with
polymide resin and heat cured
1 x 200mm bass/midrange with
composite short fibre cone, 26mm coil
on high temperature former, wound with
polymide resin and heat cured
65Hz – 20kHz ± 2.5dB on reference
axis
Sensitivity
Nominal Impedance
Power Handling
Dimensions
Finish
90dB spl(2.83V 1m)
8 ohms
10W – 75W into 8 ohms on
unclipped programme
Height: 490mm Width: 236mm
Depth: 302mm
Black ash or walnut vinyl

Bowers & Wilkins DM560 Specifications

General

Brand	Bowers & Wilkins
Model	DM560
Category	Speaker System
Language	English

Summary

Product Summary

Technical Highlights

Tweeter Technology

B&W's Tweeter technology ensures focused, time-sensitive sound and unparalleled 3D stereo imaging.

Cabinet Construction

High-density front baffle provides stability; bevelled edges reduce diffraction and improve dispersion.

Crossover and Driver Quality

Heavy gauge wire in crossover and new drivers ensure high reliability and top specifications.

Technical Specifications

Drive Units

Details the high-frequency and bass/midrange driver components and construction.

Frequency Response

Specifies the audio frequency range and tolerance on the reference axis.

Sensitivity

Indicates the sound pressure level produced at a given distance and power.

Nominal Impedance

States the electrical impedance of the loudspeaker in ohms.

Power Handling

Defines the recommended continuous and peak power input range.

Dimensions

Provides the physical height, width, and depth of the loudspeaker.

Finish

Lists the available exterior finishes for the loudspeaker.