Bowers & Wilkins DM330i User Manual

DM330i
Stand-mount/Bookshelf loudspeaker system
Product Summary
●
The DM330i is a 2
1
/
2
-way closed-box stand mount/bookshelf loudspeaker system.
●
Super sensitive, with high acoustical output yet affordable.
Technical highlights
●
Modal analysis techniques revealed a simple bonding technique of corner joints could improve
rigidity and reduce coloration.
●
New thinking on crossover design has also led to the provision of higher safe power handling
and fuse protection overload.
●
The driver chassis have non-magnetised castings for all the bass midrange units ensuring
resonance free high-level sound of the highest amplitude.
B&W Loudspeakers Ltd reserves the right to amend details of the specifications without notice in line with technical developments. E & OE. All trademarks acknowledged.
www.bwspeakers.com
Drive Units
Frequency Response
1 x 26mm high-frequency driver with
dome/coil construction of special
polymide material
2 x 200mm nominal piston dia and
26mm high temperature voice coil with
critically impregnated composite short
fibre cone
± 3dB 48Hz to 20kHz
Sensitivity
Power Handling
Dimensions
Finish
91dB spl (2.83V, 1m)
10W – 100W
Height: 857mm Width: 290mm
Depth: 320mm
American Walnut or Black Ash vinyl

Bowers & Wilkins DM330i Specifications

General

Brand	Bowers & Wilkins
Model	DM330i
Category	Speaker System
Language	English

Summary

Product Summary

DM330i System Description

The DM330i is a 2 1/2-way closed-box stand mount/bookshelf loudspeaker system.

Performance Characteristics

Features super sensitivity and high acoustical output at an affordable price.

Technical Highlights

Cabinet Rigidity and Coloration Reduction

Modal analysis techniques reveal simple bonding of corner joints improves rigidity and reduces coloration.

Crossover Design and Power Handling

Advanced crossover design provides higher safe power handling and fuse protection.

Driver Chassis Design

Non-magnetised castings for bass/midrange units ensure resonance-free, high-amplitude sound.