Do you have a question about the Bowers & Wilkins 805S and is the answer not in the manual?
Brand | Bowers & Wilkins |
---|---|
Model | 805S |
Category | Speaker System |
Language | English |
Defines the scope, limitations, and transferability of the warranty.
Procedure for obtaining warranty service and required documentation.
Overview of the Nautilus 800 Series and its technological advancements.
Guidance on navigating the manual, sections, and identification numbers.
Guidance on speaker placement relative to CRT screens to avoid picture distortion.
Recommendations for positioning front left/right and centre speakers.
Instructions for positioning surround speakers for optimal sound.
Guidance on the optimal height for surround speakers.
Placement advice for 5.1 channel surround speakers.
Placement for 6.1/7.1 channel side and rear surround speakers.
Instructions for adjusting speaker feet for height and tilt.
Guidelines for mounting speakers on shelves or stands.
Instructions for securely fixing speakers to walls or ceilings.
Ensuring correct polarity and wiring for amplifier to speaker connections.
Explanation of bi-wiring and bi-amplification techniques.
Adjusting speaker position to optimize bass response and room acoustics.
Managing uneven bass frequency caused by room resonance modes.
Understanding the break-in process for speaker components and suspension.
Guidance on selecting high-quality electronic equipment for the system.
Advice on matching amplifier power and selecting low-impedance cables.
Instructions for cleaning speaker cabinets and grilles.
Procedure for replacing the midrange grille on specific models.
Advice on cleaning tweeter housing and avoiding damage to the dome.
Detailed steps for adjusting speaker feet for various models.
Guidance on shelf, stand, wall, and ceiling mounting techniques.
Details on connecting speaker terminals and ensuring correct polarity.
Explanation of advanced connection techniques for optimal performance.
Optimizing speaker placement for sound quality and room acoustics.
Using foam plugs and placement to adjust bass response.
Understanding the break-in process for speaker components and suspension.
Guidance on choosing electronic components and interconnecting cables.
Instructions for cleaning speaker cabinets and handling grilles.
Procedures for replacing and handling speaker grilles.
Optimizing speaker placement for sound quality and room acoustics.
Using foam plugs and placement to adjust bass response.
Understanding the break-in process and listener adaptation over time.
Guidance on selecting electronic components and interconnecting cables.
Instructions for cleaning speaker cabinets and handling grilles.