To Next PageTo Next Page
Need help?Do you have a question about the Bowers & Wilkins 801D and is the answer not in the manual?
General| Type | 3-way vented-box system |
|---|---|
| Sensitivity | 90dB spl (2.83V, 1m) |
| Nominal Impedance | 8Ω (minimum 3.0Ω) |
| Minimum Impedance | 3.0Ω |
| Crossover Frequencies | 350Hz, 4kHz |
| Max. Recommended Cable Impedance | 0.1Ω |
| Recommended Amplifier Power | 50W – 1000W into 8Ω on unclipped programme |
| Finish Options | Rosenut |
| Description | Flagship floorstanding loudspeaker with Diamond dome tweeter |
| Drive Units | 1x 25mm (1in) diamond dome high-frequency |
Recommendations for optimal placement of front left and right and centre speakers.
Advice on positioning various types of surround speakers for immersive audio.
Instructions for mounting 800, 801, and 802 series speakers with adjustable feet.
Details on mounting the HTM1D centre speaker, including adjustable feet.
Instructions for mounting 803, 803S, and 804S series speakers with adjustable feet.
Guidance on mounting 805S, HTM2D, HTM3S, and HTM4S speakers.
Instructions for wall mounting the SCMS speaker using the provided bracket.
Details on wall or ceiling mounting the DS8S speaker with wall plates.
