To Next PageTo Next Page
Need help?Do you have a question about the Bowers & Wilkins CM Centre S2 and is the answer not in the manual?
General| Product color | White |
|---|---|
| Recommended usage | Speaker set unit |
| Suitable for outdoor use | - |
| Woofer | No |
| Tweeter | Yes |
| Speaker type | 2-way |
| Tweeter diameter | 25 mm |
| Number of drivers | 3 |
| Speaker placement | Tabletop/bookshelf |
| Audio output channels | - channels |
| Mid-range driver diameter | 130 mm |
| Recommended amplifier power (max) | 120 W |
| Recommended amplifier power (min) | 30 W |
| Impedance | 8 Ω |
| Sensitivity | 87 dB |
| Frequency range | 70 - 28000 Hz |
| Crossover frequency | 4000 Hz |
| Total Harmonic Distortion (THD) | 1 % |
| Connectivity technology | Wired |
| Power source type | AC |
Weight and Dimensions| Depth | 275 mm |
|---|---|
| Width | 480 mm |
| Height | 166.5 mm |
| Weight | 11500 g |
Details the items included in the product packaging for both models.
States compliance with international directives like RoHS and WEEE.
Guidance on placing the speaker for optimal sound and stability.
Advises on keeping sensitive items away from speaker's magnetic fields.
Explains terminal links for conventional and bi-wire/bi-amplification connections.
Emphasizes correct polarity and advice on speaker cable selection.
Explains how moving speakers affects bass volume and creates an impression of depth.
Discusses how room acoustics can cause uneven bass and suggests position adjustments.
Details using supplied foam bungs for fine-tuning low-frequency performance.
