Need help?Do you have a question about the Bowers & Wilkins MM1 and is the answer not in the manual?
General| Frequency Response | 50 Hz - 22 kHz |
|---|---|
| Weight | 2.5 kg |
| Color | Black, White |
| Connectivity | USB, 3.5mm Jack |
| Input Voltage | 100-240V, 50/60Hz |
| Drivers | 1 x 25mm tweeter, 1 x 100mm woofer |
Connects to the slave speaker socket on the powered speaker.
Connect from computer USB to powered speaker USB for audio playback.
Connect external analogue audio sources or PC/Mac analogue output.
Connects power supply to mains outlet and then to MM-1.
Headphone socket on back mutes speakers when a plug is inserted.
Switch the MM-1 on from standby using buttons or remote.
Adjust volume using speaker controls or remote handset keys.
Listen to analogue audio via the MM-1 aux input simultaneously with USB audio.
Plug headphones into the socket to mute MM-1 speakers.
Mute the MM-1 speakers by pressing the handset mute key.
Press handset standby key or speaker button to return to standby mode.
To Next Page