Need help?Do you have a question about the Bowers & Wilkins DM620 and is the answer not in the manual?
General| System Type | 2-way |
|---|---|
| Sensitivity | 90 dB |
| Nominal Impedance | 8 Ohms |
| Power Handling | 100 W |
| Tweeter Size | 1 inch |
| Weight | 12 kg |
| Woofer Size | 200mm |
| Finish | Black Ash |
| High-Frequency Driver | 1-inch soft dome |
Discusses the design philosophy, including enclosure technology and crossover networks.
Explains the construction and bracing of the speaker cabinets for vibration reduction.
Details the optimization of crossover components using computer technology and production testing.
Describes the high-frequency and mid/low-frequency drive units used across the 600 Series models.
Instructions on how to unpack the loudspeakers and retain packaging for future use.
Guidelines for positioning the loudspeakers for optimal sound reproduction.
Details on how to properly connect the loudspeakers to the amplifier.
Advice on cleaning and maintaining the loudspeaker cabinets and drive units.
Explains recommended amplifier power output and the risks of under-powering.
Emphasizes the importance of selecting a suitable control unit for optimal sound quality.
Discusses the quality of CD players and other sources for optimal audio reproduction.
Provides guidelines for selecting a listening room with favorable acoustic properties.
Explains how furniture and furnishings affect room acoustics and sound.
Details optimal speaker placement relative to walls and listening position for best sound.
Offers suggestions for listening and record choices to enhance the user's experience.
To Next Page