Need help?Do you have a question about the Bowers & Wilkins DM6 and is the answer not in the manual?
General| Brand | Bowers & Wilkins |
|---|---|
| Model | DM6 |
| Category | Speakers |
| Language | English |
Step-by-step guide for safely removing the loudspeaker from its packaging.
Instructions on how to attach the nylon-covered feet to the loudspeaker cabinet.
Connecting the amplifier output to the loudspeaker using 4mm plugs or DIN connectors.
Importance of observing polarity with red (positive) and black (negative) plugs.
How correct phasing affects the stereo image and a test procedure.
Low-frequency contour adjustment for room acoustics, operates up to 400 Hz.
Adjusts mid-frequency levels (500 Hz to 5 kHz) by -2, 0, or +2 dB.
Adjusts high-frequency energy (above 5 kHz) by +/- 2 dB.
Instructions to set amplifier controls to flat and speaker controls to 0 for initial tuning.
Procedure for adjusting L.F. Contour to eliminate 'boominess' or low-frequency detail clouding.
Symptoms of H.F. unit fuse failure (loss of high frequencies) and replacement procedure.
How to access and replace the H.F. unit fuse with a 315 mA 'slow' fuse.
Symptoms of system fuse failure (loss of all output) and replacement with a 2.5 A fuse.
To Next Page
