Need help?Do you have a question about the Bowers & Wilkins P3 Series 2 and is the answer not in the manual?
General| Type | On-ear |
|---|---|
| Driver Size | 40 mm |
| Impedance | 32 ohms |
| Sensitivity | 110 dB |
| Weight | 190 g |
| Cable Length | 1.2 m |
| Connector | 3.5 mm |
| Driver Type | Dynamic |
| THD | <0.1% |
Identify left and right ear pieces using engraved legends on the headband.
Slide on headphones with headband adjusted for central earpiece placement.
Fold and return headphones to case for protection and to prevent cable tangling.
Detach remote/mic cable and attach universal cable by pulling plugs from sockets.
Understand controls for volume, calls, and music playback using click switches.
Check plug connection, try alternative source, or use universal cable for no/intermittent sound.
Disable audio enhancement features on the audio source to resolve excessive bass.
Verify Apple compatibility, disconnect/reconnect, or test on another product for control issues.
Ensure secure connection, check audio source volume, and disable enhancements for sound quality.
Ensure connection security, try another source, or check cable connection within each earpiece.
To Next Page
