Need help?Do you have a question about the Bowers & Wilkins P7 and is the answer not in the manual?
Technical Features| nylon damped cone | Yes |
|---|---|
| CCAW coil | Yes |
| dual cavity ear cushions | Yes |
| changeable ear cushions | Yes |
| Bluetooth version | v4.1 |
| folding design | Hinged |
Audio Specifications| drive units | 2x ø40mm (1.6in) full range |
|---|---|
| frequency range | 10Hz – 20kHz |
| impedance | 22 ohms (passive) |
| distortion (THD) | <0.3% (1KHz/10mW) |
| sensitivity | 111dB/V at 1kHz |
Inputs and Connectivity| inputs | 3.5mm stereo jack (TRS 3-pole unbalanced stereo spec.) |
|---|---|
| micro USB 2.0 | Battery Charging, Service & FW update |
| microphones | 2x supporting CVC2 algorithm |
| Bluetooth codecs | aptX (standard latency), AAC, SBC |
Physical Specifications| cable length | 1.2m |
|---|---|
| net weight | 325g |
Identify the left and right ear pieces using engraved legends on the metal hinge below the headband.
Unfold headphones and adjust headband for comfortable earpiece fit over ears.
Detach and replace the remote/mic cable with the universal cable for broader device compatibility.
Operate calls, playback, and volume using the integrated microphone and multi-function control.
Troubleshoot connection, audio source, and cable issues for consistent sound output.
Verify device compatibility, secure connections, and test on alternate products.
Ensure secure connections, check source volume, disable enhancements, and try alternative sources.
Check connection security, try alternative sources, and inspect cable within the left earpiece.
Includes warnings on small parts, magnetic material, cable handling, loud music exposure, and device operation.
To Next Page
