To Next PageTo Next Page
Need help?Do you have a question about the Bowers & Wilkins PM1 and is the answer not in the manual?
General| Type | 2-way vented-box system |
|---|---|
| Sensitivity | 84dB spl (2.83V, 1m) |
| Crossover Frequency | 4 kHz |
| Impedance | 8 ohms |
| Recommended Amplifier Power | 30 W - 100 W |
| Weight | 12.5kg (27.5lb) |
| Net weight | 12.5kg (27.5lb) |
| Woofer | 5 inch |
| Tweeter | 1 inch |
| Dispersion Horizontal | 60 degrees |
| Dispersion Vertical | 10 degrees |
| Harmonic distortion | < 0.5% (100 Hz - 20 kHz) |
| System | 2-way |
| Drive units | 1 x 1 inch tweeter |
Provides general advice on speaker placement for optimal performance, whether on a stand or shelf.
Recommendations for placing speakers in a stereo setup for optimal sound.
Guidance on positioning speakers for home theatre systems.
Advice on keeping magnetically sensitive items away from speakers.
Safety warning regarding the use of 4mm banana plugs in certain countries.
How to adjust bass levels and address room resonance issues for optimal sound.
Techniques for reducing echoes and advice on removing speaker grilles.
