Need help?Do you have a question about the Bowers & Wilkins Panorama 2 and is the answer not in the manual?
General| Audio decoders | Dolby Digital, Dolby Pro Logic II, DTS |
|---|---|
| RMS rated power | - W |
| Audio output channels | - channels |
| Woofer diameter | 90 mm |
| Tweeter diameter | 25 mm |
| Mid-range driver diameter | 75 mm |
| Number of tweeter drivers | 1 |
| Woofer diameter (imperial) | 3.5 \ |
| Number of mid-range drivers | 2 |
| Tweeter diameter (imperial) | 1 \ |
| Number of full-range drivers | 4 |
| Mid-range driver diameter (imperial) | 3 \ |
| Subwoofer included | Yes |
| Subwoofer frequency range | 12 - 150 Hz |
| Receiver included | No |
| Product color | Black |
| Wall mountable | - |
| Apple docking compatibility | Not supported |
| Soundbar dimensions (WxDxH) | 1100 x 181 x 125 mm |
| HDMI in | 3 |
| Connectivity technology | Wired |
| AC input voltage | 100-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 36 W |
Weight and Dimensions| Depth | 181 mm |
|---|---|
| Width | 1100 mm |
| Height | 125 mm |
| Soundbar weight | 14100 g |
Adjusts bass, treble, bass EQ, subwoofer level, and subwoofer distance for optimal audio output.
Configures viewing distance, listening position offset, and wall reflective characteristics for room acoustics.
To Next Page
