Do you have a question about the Bowers & Wilkins 603 S2 and is the answer not in the manual?
frequency range | -6dB at 37Hz and 30kHz |
---|---|
frequency response | 48Hz - 20kHz ±3dB on reference axis |
nominal impedance | 8Ω(minimum 4.3Ω) |
sensitivity | 90dB spl (2.83V, 1m) |
---|---|
harmonic distortion | <1% 60Hz - 20kHz (90dB spl, 1m) |
crossover frequencies | 150Hz, 4kHz |
power handling | 25W-200W continuous into 8Ω on unclipped programme |
---|---|
max. recommended cable impedance | 0.1Ω |
dimensions | Height: 996mm (39.2 in), Width: 236mm (9.3 in), Depth: 411mm (16.2 in) |
net weight | 28.2kg (62 lb) |
frequency range | -6dB at 34Hz and 30kHz |
---|---|
frequency response | 44Hz - 20kHz ±3dB on reference axis |
nominal impedance | 8Ω(minimum 3Ω) |
sensitivity | 90dB spl (2.83V, 1m) |
---|---|
harmonic distortion | <1% 42Hz - 20kHz (90dB spl, 1m) |
crossover frequencies | 450Hz, 4kHz |
power handling | 25W-150W continuous into 8Ω on unclipped programme |
---|---|
max. recommended cable impedance | 0.1Ω |
dimensions | Height: 850mm (33.5 in), Width: 236mm (9.3 in), Depth: 306mm (12 in) |
net weight | 19.0kg (41.8 lb) |
Follow initial guide for speaker placement using an equilateral triangle and minimum distances from walls.
Keep magnetically sensitive articles at least 0.5m from the speakers to avoid interference.
Insert foam bungs into port tubes to reduce bass level without moving speaker position.
Experiment with speaker placement, room acoustics, and furniture to mitigate room resonance issues.
Adjust speaker spacing and toe-in angle to improve the central stereo image.
Modify room furnishings to soften harsh sounds or add brightness to dull sounds.
Use irregular surfaces like bookshelves and furniture to reduce flutter echoes.
Fit spike feet for stability, ensuring speakers stand firmly on the floor surface.